1850kw diesel fuel pressurized steel hot water boiler.
Industrial manufacture, food processing, kitchen,drying, cooking, washing, boiled water, heating, sterilize,gold Plating, pharmacy, chemical, textile and so on.
INTRODUCTION OF DIESEL HOT WATER BOILER:
Model:WNS1.85-1.0/85/60-Y
Brand:KITCHEN POWER
Industrial manufacture, food processing, kitchen,drying, cooking, washing, boiled water, heating, sterilize,gold Plating, pharmacy, chemical, textile and so on.
Three- pass fire tube and fully wet back structure: large furnace and smoke tube design: increase the furnace radiation heat absorption, and enhance energy efficiency.
Screwed smoke tube: enhance the heat transfer effect, it is two times higher than traditional pipe.
Reasonable internal structure: guarantee the excellent water circulation, and reduce the fluid drag.
Suitable many fuels: oil,natural gas,lpg, city gas,diesel,light oil,heavy oil and so on
Italy Baltur brand burner.
automatic adjusting water supply (use floating ball water level controller to sense)
high-low water level alarm system
over-pressure and lowest water level interlock protection.
pressure protection (double grade protection, use pressure controller to sense)
flame detection (by infrared induction electric eye to inspect)
explosion proof equipment Boiler rear panel is equipped with explosion proof equipment which connected with furnace,the equipment can prevent fuel occur deflagrate in furnace,discharge generated high energy at that moment, will automatic reset,at the same time, it has function of watch the fire sight glass and inspection gallery,in addition, can adjust the running combustion flame,it’s easy to check the furnace and maintain.
100%NDT (non-destructive inspection) report of steel plate, tube and welding rod;
100% X-ray inspection report (welding seam): to ensure the quality of the entire boiler;
Hydraulic test report: ensure the standard working pressure and safety;
Third-party inspection report: by Zhoukou Institute of Special Equipment Inspection&Technical Research
Passed CE&ISO:9001&SGS certificate
DETAIL SPECIFICATION
NO. |
Name |
Specification |
Qty |
Remarks |
1 |
Boiler Body |
WNS1.85-1.0/85/60-Y |
1 unit |
Stainless steel cover packing |
2 |
Boiler platform&ladder |
standard |
1unit |
Sitong |
3 |
Circulating pump |
IRG100-200B |
4set |
Shanghai |
4 |
Electric Controller |
ST-3 |
1 unit |
Nanjing |
5 |
Temperature sensor |
0-200℃ |
2 set |
Zhengzhou |
6 |
Feed water pump |
Stainless steel |
1 set |
Shanghai |
7 |
Check valve |
PN1.6 DN100 |
1 set |
Zhengzhou |
8 |
Blowdown valve |
PN1.6 DN40 |
1 set |
Zhengzhou |
9 |
Automatic valve |
PN1.6 DN100 |
1 set |
Zhengzhou |
10 |
Sight glass |
standard |
1 set |
Sitong |
11 |
Water Treatment |
FLECK(resin250L) |
1 set |
America |
12 |
Water Header |
ф325 |
1 unit |
Sitong |
13 |
Gate valve |
Z41H-16/PN1.6 DN100 |
1set |
Zhengzhou |
14 |
Gate valve |
Z41H-16/PN1.6 DN100 |
1set |
Zhengzhou |
15 |
Water tank |
2m3 |
1set |
Sitong |
16 |
Dirt separator |
standard |
1set |
Zhengzhou |
17 |
Bent Pressure Gauge |
Factory Standard |
1 piece |
Sitong |
18 |
Three-way cock Pressure Gauge |
PN1.6 |
2 pieces |
Sitong |
19 |
Spring Safety Valve |
PN1.6,DN40 |
2 piece |
Kaifeng |
20 |
Pressure gauge |
0-1.6 |
2 piece |
Hangzhou |
21 |
Heat exchanger |
30 ㎡ |
1set |
Sitong |
22 |
Light oil burner |
BT250DSG |
1 set |
Italy |
23 |
Boiler room inside install material |
Standard |
1suit |
Sitong |
24 |
Daily oil tank |
standard |
1set |
Sitong |
Optional auxiliary equipments:
NO. |
Name |
Specification |
1 |
Pressure hot water storage tank |
2350L |
2 |
Solar energy heat collector |
5㎡ |
3 |
Circulating pump |
RS15-16, Can not confirm the quantity now |
4 |
Controller |
For each group |
5 |
Stainless steel tube |
AISI316L |
6 |
Simple frames |
For the heat collector |
7 |
Copper connector |
Can not confirm the quantity now |